+86 372 3700288



Automatic production line of
CNC lathe and pipe threading lathes.

Automatic bearing ring production line

Automatic bearing ring production line:

XSPT-002 bearing ring automatic line is composed of three ADJ15P CNC lathes and a set of SMT20 Manipulator automatic feeding device.
The automatic line to grab the workpiece weight ≤ 7Kg.
Outer diameter: 100mm-200mm
The width of disk type parts: 14mm-70mm.
Designed according to user-specific requirements.

Workpiece Bearing out ring(No. CG-GAC110S/K.01-LG1)
Annual output estimation 12 months×26 days×20 hours×3600 seconds×0.85 Utilization rate/85 seconds(Automatic line cycle time)= 224640 pieces.

layout of the bearing ring lathes:

Six-station Rotary tray silos:

The feeding device of the automatic line is composed by the 6 Station pallet type rotary silos, and the silo is controlled by the sensor induction signal. It can control the feeding position and the stroke of each action.
Silo specifications: 6 stations.
Delivery parts diameter: Φ30 ~ Φ230;
Each station stack height: 400mm.
Each tray carry weight: 35kg.


Bearing ring turning:

Flange parts:


Our Support Team Usually Answer During 24 Hours.

Company name:* Name:* Telephone:* E-mail:* Content:*

+86 372 3700288
+86 372 3700288

West part of xiange raod, Hi-tech zone, Anyang,Henan,China.